Outstanding
Author Award Recipients
of the
Galvanizers Association
|
| 2006 |
Strip Shape and
Temper Rolling in Galvanize Lines |
Steve Hesling, Metal Process Solutions |
| 2006 |
Sink Roll Alloys
and Coatings, and Dross Print-Through Control |
E.A. Silva, US Steel Research, and C.E. Dewey, K. Okamoto, E.E.
Franks, PRO-TEC Coating Company |
| 2005 |
Electromagnetic
Strip Stabilizer for Hot Dip Galvanizing Lines |
Olof Sjoden, Mat Malander, Peter Lofgren, Jon-Erik Eriksson,
Patrick Hanley, ABB Inc., and Hans Sollander, SSAB Turnplat AB |
| 2005 |
Cleanliness
Enhancement of the Bath Surface Within a CGL Snout |
Craig Phillips, Neil Staples, Corus Group UK and Mark
Bright , Metaullics Systems |
| 2004 |
On-Line Chemical
Analysis of CGL Baths Using Laser-Induced Breakdown Spectroscopy |
Martin Gagne & E. Baril, Falconbridge Ltd., L. St-Onge & M.
Sabsabi, National Research Council - Canada, & J. Lucas |
| 2004 |
Ispat Inland's
Experience with Ceramic SERs in Horizontal Galvanize Line |
Tim McCrea, G. Gabbert, J. Dolinar & R. Patil, Ispat
Island Inc. |
| 2003 |
Application of
Wedge Pyrometers for Strip Temperature Measurement in Vertical Annealing
Furnaces |
Jason Schultz, James Ridge and Randell Urquhart, Dofasco Inc. |
| 2003 |
Coil Winding in
Galvanizing Lines |
Steve Hesling, IAS Inc. |
| 2002 |
How to Produce Galvalum and
Galvanized using a Pot in a Pot Method in an Induction Coreless Pot |
Oscar Acuna, Galvak S.A. de C.V. |
| 2002 |
The New Continuous
Vertical Galvanizing Line Technology |
Rolf Brisberger, SMS DEMAG AG |
| 2001 |
Effective Chromate
Application - An Innovative Roll Coating Solution |
Karl Herman, Eric Almquest and Casey Hendrix, 3M |
| 2001 |
Active
Control of Sheet Motion for a Hot-Dip Galvanizing Line |
Stuart Shelley
and Thomas Sharp, Steel Dynamics |
| 2000 |
New
Hot Dip Coated High Strength and Ultra Formable Steels |
Ed Silva, US
Steel |
| 2000 |
A
Statistical Analysis of Coating Weight Measurements |
Richard Corson,
Corson Manufacturing Consultants |
| 1999 |
Air Floatation Coolers...A users perspective |
Jim Renes,
Spooner Technology |
| 1999 |
Pro-Tec Coating Co. Warehouse expansion and upgrade project |
Al Hueve, Pro-Tec Coating Co. |
| 1998 |
Analysis
Of Zinc Melt For Aluminum, Iron And Dross Intermetallics |
C.R. Shastry
& J.J Galka, Bethlehem Steel Corp. |
| 1998 |
Investigating
Fluid Flow In Continuous Galvanizing Baths Using Numerical Modeling |
Martin Gagne
& Michael Guag, Noranda Metallurgy, Inc. |
| 1997 |
Air
Knives Preparation: A Key to Successful Performance |
Diego Migliorino, Siderar
S.A.I.C. |
| 1997 |
High
Frequency Galvannealing With a Doorless Inductor |
Ed Rylicki and Allen
White, Inductoheat Inc. |
| 1996 |
Aluminum
Distribution in a CGL Bath |
Graeme Anderson
and Nai-Yong Tang, Cominco Limited |
| 1996 |
Upgrading
and Optimization of Optical Pyrometers at Dofasco’s #2 CGL. |
James Ridge, Dofasco |
| 1995 |
An
Innovative Method of Recycling Alkali Cleaneing Baths for Cost Reduction and
Quality Enhancement |
Richard
Bowering, Stelco Steel and Brooke Stratton, Steltech Ltd. |
| 1995 |
Use
of Siphons to Control Coating Mass at Strip Edges |
Larry Caldwell and
Jim Forand, Global 3T, Ltd. |
| 1994 |
Reline
of #5 Line Galvanneal Furnace Weirton Steel Corporation |
Brian Lester, Wierton Steel
Corporation |
| 1994 |
High
Performance Coating Weight control for Hot Dip Galvanizing Lines |
Richard Corson, ABB
Industrial Systems |
| 1993 |
HDG
at Pro-Tec Coating Co. |
Pat Finan, Pro-Tec Coating
Company |
| 1993 |
Microstructural
Evolution During the Formation of a Galvanneal Coating. |
A. Simard, Ecole Polytechnique |
| 1992 |
Maintaining
Recyclability of Galvanized Scrap |
Robert Muhlhan, LTV Steel Company |
| 1992 |
Water
Modeling of a Continuous Galvanizing Bath |
Martin Gagne,
Noranda Sales Corp., Ltd. |
| 1991 |
The
Production of Formable Hot Dip Galvanized Sheet |
John F. Butler, LTV Steel Company |
| 1991 |
Formability/Microstructure
Relationships of Galvanneal Coatings |
Jacques L’Ecuyer,
Noranda Sales Corp., Ltd. |
| 1990 |
Pipe
and Tube Galvanizing Today |
Burkhard Brock, LOECO |
| 1990 |
Strip
Shape Measurement and Control at Inlands Hot Dip Galvanizing Lines |
Y. Bilimoria, Inland
Steel Co. |
| 1990 |
On-Line
Measurement of Binary Metal Coatings on Metallic Substrates |
Roland M. Gouel,
Data Measurement Corp. |
| 1989 |
lnstallation
and Operation of a Modern In-Line Skim Pass Unit in Armco Ashland Works #3
Coating Line |
Gerald Barney,
Armco Inc. |
| 1989 |
The
Solubility of Iron in Continuous Hot Dip Galvanizing Baths |
Serge Belisle,
Noranda Sales Corp., Ltd. |
| 1988 |
Modernization
of No. 3 Galvanize Line at Inland Steel Company |
Brian L. Wagner, Inland Steel Co. |
| 1988 |
Heat
Reclamation Burners Applied to Continuous Galvanneal Furnace |
James D. Bowers,
North American Mfg. Co. |
| 1987 |
Modernization
of Inland Steel Company’s #5 Hot Dip Galvanize Line |
Ram Patil,
Inland Steel Co. |
| 1987 |
lnduction
Heating for Galvannealing |
Nicholas Ross, Ajax
Magnethermic Corp. |
| 1986 |
Spangle
Size Control on Galvanize Product |
T. Slack, D. Reed
and E. MacKinnon, Stelco Inc. |
| 1985 |
The
Formability of Hot-Dipped Galvanized Steels |
Wayne Granzow, Armco Inc. |
| 1982 |
Relationship
Between Surface Composition, Steel Mill Processing and Paint Pretreatment of
Galvanized Strip |
Dr. Farrell M. Kilbane, Armco
Inc. |
| 1981 |
Problems
Associated with the Electrophoretic Deposition of Paint on Galvanized Steels |
L. L. Franks and
G. W. Froman, Inland Steel Co. |
| 1980 |
ZlNCGRlP
0.5. and ZINCGRIP ULTRASMOOTH Galvanized Steels for Exposed Automotive Body
Panels |
D. S. Mitch,
Armco, Inc. |
| 1979 |
Flux
Line Fume Control Practices |
R. C. Van
Fossan and H. J. Imblum, Republic Steel Corp. |
| 1978 |
ZlNCGRlP
O.S. Armco’s One-Side Galvanized Steel |
A.
F. Gibson, H. F. Graff and M. B. Pierson, Armco. Inc. |
| 1976 |
Surface
Composition of Hot Dip Galvanized |
P. L.
Conduti, L. L. Franks and D. E. Smith, Inland Steel Co. |
| 1974 &1975 |
Metallurgy
of the Galvannealing |
Walter
Batz, E. F. Paul and Howard Smith, J & L Steel Corp. |
| 1973 |
GALVALUME-Bethlehem’s
New Aluminum-Zinc Coated Sheet Steel |
A.
R. Borzillo,L. B. Caldwell, J. J. Connolly and L. P. Pellatiro, Bethlehem
Steel Corp. |
| 1972 |
The
Influence of In-Line Temper Rolling and Stretch |
M. B. Pierson, Armco Inc. |
| 1971 |
Some
Important Factors in the Design and Operation of a Furnace for Continuous
Galvanizing |
M. B. Pierson,
Armco Inc. |
| 1970 |
The
Development of Air Coating Control for Continuous Strip Galvanizing |
D.
J. Beam, J. J. Butler, Jr. and J. C. Hawkins, J & L Steel Corp. |
| 1969 |
Properties
of Galvanized Sheet Made from Continuously Cast Slabs |
John M.
Sheehan and Orville P. Berns, U.S. Steel Corp. |
| 1968 |
Continuous
Cast Silicon Killed Steel f or Pipe Galvanizing |
J. L. Hubbard,
Laclede Steel |
| 1967 |
The
Galvanizing of Steel |
W. C. Sievert and
L. M. Bernick, Inland Steel Co. |
| 1966 |
Five-Year
Test Results: AISI Research Project on Paintability of Galvanized Steel |
Joseph
Bigos, U. S. Steel Corp., H. H. Greene, Republic Steel Corp. and G. R.
Hoover, Armco Inc. |
| 1965 |
Versatility
of Weirton’s New Coating Technique |
I. D. Carson,
Weirton Steel Corp. |
| 1964 |
Operational
Maintenance of Sendzimir Galvanizing Lines at Dofasco |
Arthur G.
Linke, Dominion Foundries & Steel Co. Ltd. |
| 1963 |
Edge
Rusting of Coated Steels |
Frank J. Cole,
Republic Steel Corp. |
| 1962 |
Developments
in the Manufacture of Galvanized Sheets for Deep Drawing Applications |
C. W. Beattie and Eli
Komnenovich, Armco Inc. |